How To Register Panasonic Range Extender

Setting Upwardly a Panasonic KX-A406 Repeater

The Panasonic KX-A406 is a minor hardware add-on to the Panasonic KX-TGP600. It is designed to sync to the Panasonic KX-TGP 600 base unit and repeat the signal to up to 4 handsets outside the range of the base unit. The repeater doubles the range of the base unit for the handsets by calculation an boosted 50m range to the base unit. A full of three repeaters may exist synced to the base unit in a "cascade" manner setup, effectively quadrupling (200m) the range of the Panasonic KX-TGP 600 base unit for upwards to 4 handsets.

Earlier a repeater tin can be registered to the Panasonic KX-TGP600 base of operations unit, Repeater Mode must be enabled on the base unit. Follow the instructions below to exercise this:

Choice upwardly a handset registered to the Panasonic KX-TGP600 base unit of measurement from the charger.
Press the Menu softkey (heart softkey) at the bottom of the screen.
Select Arrangement Settings → Repeater Mode → On from the menu.

Enabling Repeater Mode through the Web Configuration Utility

From the master screen of a handset registered to the Panasonic TGP600, select Menu → Setting Handset → Other Pick → Embedded Web → On.
On a handset registered to the Panasonic KX-TGP600, press the MENU softkey (middle softkey).
Select System Settings from the menu.
Select Status → IPv4 Settings → IP Address from the bill of fare.
Record the IP Accost that appears on the screen.
Enter the IP Address into the address bar of a web browser on your computer.
Navigate to the Phone's IP Address
Enter admin as the username and adminpass equally the password.
Log In to Phone Interface
Click the System tab at the acme of the screen.

System Tab
Click System Settings on the left side of the screen.
System Settings
Select the Yeah radio button to the right of Enable Repeater Mode.
Enable Repeater Mode
Click Save at the bottom of the screen. The Panasonic KX-TGP600 base unit will reboot, after which Repeater Style volition be enabled.
Relieve Changes

After y'all salvage these changes, or make the changes via the handset, the repeater mode will exist active, and whatsoever repeaters registered to the Panasonic KX-TGP600 base of operations unit of measurement will be active and adding to the base of operations'southward operating range.

Registering the Repeater

After Repeater Mode has been enabled on the Panasonic KX-TGP600 base unit, you can register the Panasonic KX-A406 repeater to the base unit. Follow the instructions below to do this.

Disconnect the AC adapter from the repeater, if information technology is not already.
Press and hold the handset locator button on the base of operations unit of measurement until the status indicator light flashes red, and and so release the handset locator push.
Connect the Ac adapter to the repeater.
When the status lite on the repeater flashes cherry-red, printing and hold the PROGRAM button on the back of the repeater until the status calorie-free and the RSSI/ID light turns solid greenish.
If the condition lite on the base unit of measurement is still flashing red, press the handset locator button once until the condition light is solid green. The repeater is now ready for utilize.

Was this article helpful?